Best Supreme (Holdings) Ltd. : Our Products : Air Filtration

CLYDE-IFC™ Air Filters for HVAC systems, hosptials, biotechnology, laboratories

CLYDE-IFC manufactures a full range of air filters. CLYDE-IFC filters are widely used in commercial buildings, industrial estates, heating, ventilation, air conditioning, HVAC systems, clean rooms, nuclear establishments, pharmaceutical production, research laboratories, biotechnology research laboratories, hosiptals, medical centres, shopping centres, universities, polytechnics, schools.
Our manufacturing firm are ISO9001:2000 quality managed and manufactured with state of art processes. Our end products undergo rigorous testing procedures like Sodium flame Photometric Test and D.O.P for the filter efficiency.

Our OEM products are widely used in many HVAC systems, hospitals, laboratories, commerical and industrial buildings in Singapore as well as regional countries like Malaysia, Indonesia, Thailand and Philippines.
HEPA, ULPA, Pleated, Intercell, Interfirm for Industrial and Commerical

Pre-filters for commercial and industrial estates

FC Al/ GI Synthetic Washable Frame

Used as pre-filter/low Efficiency air filter in both AHU and most widely used in Fan Coil units. Designed to be washable. Efficiency drops after several washing. Also known as coarse filters for filtration of 5-10microns size particles.
Available Efficiency: G1-F5 ( Please refer to washable roll filters for more information) Efficiency is based on Arrestance Efficiency

IFC IF50 Inter-Fold Pleated Disposable / Pre-Filters

Pre-filter/Medium Efficiency air filter is widely used as pre-filtration in AHU, FCU, HVAC equipment. Available in 1-4 inches thickness.

Available Efficiency: G4 - 25-35%, F5 - 40-55%, F6 - 60-65%

<--Back to top

Secondary air filters for HVAC systems

IFC IFR95 Inter-Firm Rigid Box Cell

Laminated needle punched media for improved efficiency with lower pressure drops. Used as secondary filters and are easily installed for factory fabricated AHU. Filtration Efficiency of 1-3microns for secondary filters.

Available in 6" & 12" thickness.

Available Efficiency: F5 - 40-55%, F6 - 60-65%, F7 - 80-85%, F8 - 90-95%

IFC IP95 Sythnetic Inter-Pocket

Lowest cost among secondary filters, versatile and widely used secondary filters in heating, ventilating and air conditioning systems. Newly meltblown sythetic filter has good efficiencies at low pressure drops. Ultrasonic weld seal for total seal.

Available in 12", 16" ,22" ,28", 32" thickness.

Available Efficiency: F5 - 40-55%, F6 - 60-65%, F7 - 80-85%, F8 - 90-95%

IFC IC95 Inter-Cell

Fibreglass media specifically designed for the rotating machinery industry to operate in conditions associated with centrifugal compressors, gas turbines and when characteristics of pulsations or suring exist.

Available in 6" , 12" thickness.

Available Efficiency: F5 - 40-55%, F6 - 60-65%, F7 - 80-85%, F8 - 90-95%

IFC Mini pleat Delta C-Cell

4" thick minipleat media made from 100% polypropylene suitable for Heating, Ventilation and air condioning (HVAC) systems or gas turbine applications. All thanks to electrostatic effect of PP, it is high efficiency and is also anti-microbial. For extended replacment time.

Available in 2" & 4" thickness

Available Efficiency: F5 - 40-55%, F6 - 60-65%, F7 - 80-85%, F8 - 90-95%, F9 - >95%, H10 - 85%@0.3um

IFC Mini pleat Delta V-Cell

High media area, Fully plastic, V-shaped designed made from 100% polypropylene suitable for Heating, Ventilation and air condioning (HVAC) systems or gas turbine applications. All thanks to electrostatic effect of PP, it is high efficiency and is also anti-microbial. Increased use in electronics and pharmacetical and hospital AHU applications for its extended replacment time and highly energy savings.

Available in 12" thickness

Available Efficiency: F5 - 40-55%, F6 - 60-65%, F7 - 80-85%, F8 - 90-95%, H10 - 85%@0.3um

<-- Back to top

High Efficiency HEPA/ULPA

IFC Mini pleat HEPA/ULPA and Disposable Terminal Modules DTM Filters

CLYDE-IFC High efficiency Particulate (HEPA) Air filters also known as Absolute Filters are one of the highest range of efficiencies. CLYDE mini pleat HEPA filters are specifically developed for the collection of low micron and sub-micron particles. For this reason, they are used extensively in the following critical industries to contain contaminant and assist in creating aseptic conditions

Available in 70mm thickness

Available Efficiency: 95%@0.3um, 99.97%@0.3um, 99.99%@0.3um, 99.999@0.12um, 99.9999@0.12um.

Aluminium Separator HEPA & ULPA Filters

These ducted modules are designed to optimize performance in filtration applications for the pharmaceutical, medical, semiconductor, microelectronic, biotechnology and photographic industries as well as surgical rooms in hospitals.

vailable in 6" and 12" thickness.

Available Efficiency: 95%@0.3um, 99.97%@0.3um, 99.99%@0.3um, 99.999@0.12um, 99.9999@0.12um.

Fan Filter Unit (FFU)

For critical applications like electronics and biotechnology industries. Widely used in clean rooms. Have a installed fan to assist to deliver more airflow and extended life for the HEPA filters. Can requested in various minipleat efficiency.

Size: 600x1210x330mm 1200cmh@120Pa

Available Efficiency: 95%@0.3um, 99.97%@0.3um, 99.99%@0.3um, 99.999@0.12um, 99.9999@0.12um.

<-- Back to top

Washable Filter media and Odour/Carbon Filters

IFC Inter-Fold 'C'Carbon

IFC Interfold 'C' Carbon filters are suitable for odour control and contaminants control like fumes, animal odours, body odours, hydrogen sulfide etc. Kraft board frame for odour and low vapour removal, it acts dual as a pre-filtration of G4 - 25-35% dust spot efficiency.

Available Efficiency: >60% CTC Removal

IFC FC/Honeycomb Activated Carbon for odour and vapour removal

Impregnated Granular Activated carbon filters for organic solvents, vapours, odours, chemicals fumes removal. Honeycombed design has a plastic mesh and corrugated paper for pre-filtration to G3 grade - >90% Arrestance Efficiency.

Available in 1",2" GI/Epoxy-baked metal frame

RSE12 Carbon-V 12"thick and RSE2002 Carbon-V trays available for heavy vapour removal and usage. Used in Museums, Electronics Semiconductor industries and Pharmaeutical Industries.

Available Efficiency: >60% CTC Removal

Interglass(Fibreglass) filters

Mainly effective in removal of paints, inks. Also known as paint-arrestor filters. Pre-filtraiton grade of G3

Synthetic Washable Filters and Filter Roll Media

CLYDE-IFC developed a full range of original CLYDE Filter Roll Media with excellent performance in every aspect. CLYDE-IFC offers a wide range of quality filter media for the production of panel filters and extended surface filters. We distribute Libeltex , Aeroglass Roll filters.

<-- Back to top

For enquiries for CLYDE-IFC products, please call Tel: (852) 2834 3299 or email us at info@bestsupreme.com.hk. Please be reassured your email will be replied immediately.